Bộ khuếch đại tín hiệu ngọn lửa IONIZATION FLAME AMPLIFIER 3011 BFI Automation Việt Nam

Technical data

Mode displays via LED: “operation on“ = green
“flame on“ = (yellow)
“fault on“ = (red)
Flame detection: = > 2μA
failure value: =- < 0.3μA
Flame signal: - generally 25μA,
- measuring sockets in the front panel
- measurement possible without circuit splitting
- measuring range approximate 30μA
Contact outputs: - - two separate safety circuits
(relay change-over contact) each
protected with M1A, max. switching
- max. voltage 250 V (as an option,
dual design with two relays).
Mode of operation: Ionisation (also possible with common ignition and
sensor electrode).
Voltage supply: 115 / 230V AC, -15 % / +10 %
Mains frequency: 50 - 60 Hz , +/- 6 %
Power consumption: 5.7 VA
Operation temperature: - 20 °C to + 70 °C
Weight: 400 g
Protection: IP 00
Part-no for continuous operation: H 101
Part-no for maintenance-free
Operation of up to 72 hours: H 102
All modules of the series 3000 are plug-in types for using in 19“-magazines accordance to DIN 41494
(19“-norm).
The dimensions of all modules are:
Wide 30.14mm =6 HP
Height 128.7 mm=3 U
Depth 188.0 mm

https://www.bfi-automation.de/en/categories/system-3000/ionization-flame-amplifier-3011