- Mã sản phẩm: Bộ nạp nito cho bình tích áp Model FPU-1-400F2.5G2A3K Hydac Việt Nam
- Giá: Liên hệ
- Lượt xem: 11604
- Bộ nạp nito cho bình tích áp Model FPU-1-400F2.5G2A3K Hydac Việt Nam
-
- Thông tin sản phẩm
- Bình luận
FUNCTION The charging and testing unit FPU-1 is used to charge accumulators with nitrogen or to check or to change the existing pre-charge pressure in accumulators. For this purpose the charging and testing unit is screwed onto the gas valve of the hydraulic accumulator and connected to a commercial nitrogen bottle via a flexible charging hose. If the nitrogen pressure is only to be checked or reduced, the charging hose does not need to be connected. The unit has a screw-type fitting with a built-in gauge, check valve and a spindle for opening the accumulator gas valve to control the pressure. HYDAC piston and diaphragm accumulators can be charged and checked without the need for adaptors. Bladder accumulators, however, require an adaptor
Sản phẩm khác
Máy bơm cánh gạt đôi - VT6CC Double Vane Pumps - VT6CC code VT6CC-B25-B10-1R00-C1-00 Veljan Hydrauli
Giá: Liên hệ
Lưu lượng kế Code: RK1710-Air/N2-20L/min I RK1710-Air/N2-20L/min Flow meter Kofloc Vietnam
Giá: Liên hệ
Cảm biến phát hiện ngọn lửa Code: 95UVS4-1WINC InSight Series IV Flame Scanner Fireye Vietnam
Giá: Liên hệ
Cảm biến giám sát vị trí NJ20+U1+W (Part no: 36684S; U=20-253 VAC; I=500mA) P+F Việt Nam
Giá: Liên hệ
NS287-59E, Công tắc báo mức, Nakakita Seisakusho Vietnam, LEVEL SWITCH NS287-59E Nakakita Seisakusho
Giá: Liên hệ