- Mã sản phẩm: Model: SFH-220S Coupling Miki PulleyVietnam
- Giá: Liên hệ
- Lượt xem: 4042
- Model: SFH-220S Coupling Miki PulleyVietnam
-
- Thông tin sản phẩm
- Bình luận
[Specifications] SFH-□S
Model | Rated torque [N・m] | Misalignment | Max. rotation speed [min-1] | Torsional stiffness [N・m/rad] | Axial stiffness[N/mm] | Moment of inertia [kg・m2] | Mass [kg] | |
---|---|---|---|---|---|---|---|---|
Angular [°] | Axial [mm] | |||||||
SFH-150S | 1000 | 1 | ±0.4 | 5900 | 1500000 | 244 | 12.60×10-3 | 4.71 |
SFH-170S | 1300 | 1 | ±0.5 | 5100 | 2840000 | 224 | 26.88×10-3 | 7.52 |
SFH-190S | 2000 | 1 | ±0.5 | 4700 | 3400000 | 244 | 43.82×10-3 | 10.57 |
SFH-210S | 4000 | 1 | ±0.55 | 4300 | 4680000 | 508 | 68.48×10-3 | 13.78 |
SFH-220S | 5000 | 1 | ±0.6 | 4000 | 5940000 | 448 | 102.53×10-3 | 18.25 |
SFH-260S | 8000 | 1 | ±0.7 | 3400 | 10780000 | 612 | 233.86×10-3 | 29.66 |
*Max. rotation speed does not take into account dynamic balance.
*The moment of inertia and mass are measured for the maximum bore diameter.
[Dimensions] SFH-□S
Model | d1, d2 | D | N | L | LF | S | F | K | M | ||
---|---|---|---|---|---|---|---|---|---|---|---|
Pilot bore | Min. | Max. | |||||||||
SFH-150S | 20 | 22 | 70 | 152 | 104 | 101 | 45 | 11 | 5 | 94 | 6-M8×36 |
SFH-170S | 25 | 28 | 80 | 178 | 118 | 124 | 55 | 14 | 6 | 108 | 6-M10×45 |
SFH-190S | 30 | 32 | 85 | 190 | 126 | 145 | 65 | 15 | 10 | 116 | 6-M12×54 |
SFH-210S | 35 | 38 | 90 | 210 | 130 | 165 | 75 | 15 | 8 | 124 | 6-M16×60 |
SFH-220S | 45 | 48 | 100 | 225 | 144 | 200 | 90 | 20 | -2 | 132 | 6-M16×60 |
SFH-260S | 50 | 55 | 115 | 262 | 166 | 223 | 100 | 23 | 11 | 150 | 6-M20×80 |
*Pilot bores are to be drilled into the part. See the standard hole-drilling standards for information on bore drilling.
*If you require a product with an LS dimension that exceeds those above, contact Miki Pulley with your required dimension [mm]. Please contact Miki Pulley for assistance if the LS dimension is less than those above or if LS ≧ 1000.
*The nominal diameter of the reamer bolt is equal to the quantity minus the nominal diameter of the screw threads times the nominal length.