- Mã sản phẩm: ST1525-HF
- Giá: Liên hệ
- Lượt xem: 3095
- Từ năm 1999, Proton là một trong những thương hiệu tiên phong về giải pháp đo lường cho ngành sản xuất sợi và cáp. Proton thấu hiểu nhu cầu thực sự của nhà sản xuất sợi và cáp, từ đó đưa ra các sản phẩm tiên tiến nhằm cung cấp các giải pháp đo lường chính xác và dễ dàng sử dụng. Qua đó, sản phẩm của Proton đã xuất hiện trong dây chuyền sản xuất của các nhà sản xuất sợi và cáp hàng đầu thế giới. Vui lòng liên hệ Hotline 0914.643.179 để được tư vấn thêm.
-
- Thông tin sản phẩm
- Bình luận
Features
- 25mm maximum wire diameter.
- 100mm long bead chain electrode.
- 15kV maximum test voltage.
- Slide bead electrode for easy maintenance.
- Brush electrode version available.
- Distinguishes and separately counts pinhole and bare patch flaws.
- 2.1 to 4.5kHz sine wave test frequency (load dependent).
- 2000 to 3000 m/min line speed (test frequency dependent).
- Ozone extraction port.
- UL1581 compliant spark testing.
Introduction
Proton Products InteliSENS® ST-HF series high frequency spark testers meet the international standards stipulated for wire insulation testing.
High frequency spark testing allows a greatly increased line speed capability compared with mains frequency testing, especially in the case of UL1581, where the 9-cycle requirement makes the electrode length required for mains frequency testing impractical. Compared with mains frequency testing, high frequency testing generates an ionization cloud at a relatively low voltage. This ensures complete coverage of the wire surface.
The InteliSENS® ST-HF Series gauge head electronics are housed in a rugged IP65 sealed steel case, ensuring reliability and long operational life.
Specifications
ST1525-HF Specification | Minimum | Typical | Maximum | Units |
---|---|---|---|---|
Wire diameter | 0.4 | 25 | mm | |
UL1581 compliant line speed | 3000 | m / min | ||
Electrode length | 100 | mm | ||
Electrode type | 2.5mm bead chain | |||
EHT test output voltage | 0 | 15 | kV (rms) | |
EHT test output voltage resolution | 0.1 | kV (rms) | ||
EHT test output voltage accuracy | 2 | % | ||
EHT test output frequency | 2.1 | 4.5 | kHz | |
EHT test output capacitive current (at 15 kV) | 24 | mA (rms) | ||
EHT test output resistive current | 5 | mA (rms) | ||
EHT test output continuous short circuit current | 5 | mA (rms) | ||
Power supply voltage | 85 | 220 | 264 | VAC (rms) |
Power supply frequency | 47 | 65 | Hz | |
Power consumption (with optional AiG2 interface display unit) | 100 | W | ||
Weight | 25 | kg | ||
Operating temperature | 5 | 45 | °C | |
41 | 113 | °F |
Standard interfaces
Enable input | Safety interlock input to enable the EHT test output voltage | |
2x Logic inputs |