Đ/c: Số 21, Đường Số 12, Khu Đô Thị Vạn Phúc, P. Hiệp Bình Phước, Q.Thủ Đức, Tp HCM
CTY TNHH DỊCH VỤ KỸ THUẬT TỰ ĐỘNG HÓA LÂM TUỆ ĐỨC CTY TNHH DỊCH VỤ KỸ THUẬT TỰ ĐỘNG HÓA LÂM TUỆ ĐỨC CTY TNHH DỊCH VỤ KỸ THUẬT TỰ ĐỘNG HÓA LÂM TUỆ ĐỨC CTY TNHH DỊCH VỤ KỸ THUẬT TỰ ĐỘNG HÓA LÂM TUỆ ĐỨC CTY TNHH DỊCH VỤ KỸ THUẬT TỰ ĐỘNG HÓA LÂM TUỆ ĐỨC

  • Mã sản phẩm: DG2200-1k
  • Giá: Liên hệ
  • Lượt xem: 2276
  • Từ năm 1999, Proton là một trong những thương hiệu tiên phong về giải pháp đo lường cho ngành sản xuất sợi và cáp. Proton thấu hiểu nhu cầu thực sự của nhà sản xuất sợi và cáp, từ đó đưa ra các sản phẩm tiên tiến nhằm cung cấp các giải pháp đo lường chính xác và dễ dàng sử dụng. Qua đó, sản phẩm của Proton đã xuất hiện trong dây chuyền sản xuất của các nhà sản xuất sợi và cáp hàng đầu thế giới. Vui lòng liên hệ Hotline 0914 237 179 để được tư vấn thêm.
  • Thông tin sản phẩm
  • Bình luận

Features

  • Completely solid-state design with no moving parts for very high measurement speed and long term reliability.
  • Eye-safe LED illumination.
  • Integrated air wipes.
  • Comprehensive selection of standard and optional industrial communications interfaces.
  • Optional integrated PI feedback controller for controlling extruders or capstan drives on insulation lines.
  • Optional integrated lump and neck flaw detection capability (SMFD – Single Measurement Flaw Detection).
  • Optional integrated fast Fourier transform (FFT), statistical analysis and Statistical Process Control (SPC) functions available.

Introduction

Proton Products InteliSENS® DG-k series dual and triple-axis diameter gauges are super fast, with scan rates of 1000 to 10,000 scans/second/axis, providing outstanding product quality supervision.

Using LED light sources, high-speed Digital Signal Processing (DSP) and specialized optical design to measure, control, inspect, alarm and report diameter as well as Surface Quality Defects (SQD) as they happen, reducing customer complaints and improving your reputation as a quality product supplier.

The LED light sources cover the complete circumference of the product and any change in the diameter is immediately detected by the CCD optical receiver, measuring, controlling, alarming and reporting the diameter as well as the height, length and location of lumps and necks (if the SMFD option is purchased) along and around the product.

Extremely easy to install, integrate and use, InteliSENS® DG-k Series super fast diameter gauges can be used as a stand-alone device or integrated with production line PLCs. Optional audio/visual alarm units, fault printers and data logging PC software are available to complement the diameter gauge and close the loop on quality control.

Applications include production processes such as insulation extrusion and jacketing, wire drawing, quality control during rewinding and coiling, and rubber and plastic extrusion processes for hose, tube and pipe production.

Operating principle

The Proton Products InteliSENS® DG-k series of diameter gauges illuminate each axis of the measured object with light from a LED light source. The measured object obstructs part of the light which is then imaged onto a CCD detector array. Analysis of the pixel data from the CCD yields the object diameter. As this system is entirely solid state, it provides a very fast measurement rate together with the reliability and robustness of a system free from moving parts.

The high measurement rate of the InteliSENS® DG-k series also enables it to function as a lump and neck flaw detector at medium line speeds (< 500 m/min) when purchased with the high speed (10k) and SMFD (Single Measurement Flaw Detection) options.

Specifications

InteliSENS® DG2015-k 15mm Diameter Gauges

 

Model DG2015-5k DG2015-10k Units
Number of axes 2 2 -
Scan rate 5000 10000 scan/s/axis
Cumulative scan rate 10000 20000 scan/s
Update time 200 80 µs
Maximum weight 3.4 kg

 

Specification Minimum Typical Maximum Units
Object diameter 0.2   15 mm
Optical gate diameter     16 mm
Accuracy* -1   1 µm
Output resolution     1 µm

InteliSENS® DG2030-k and DG3030-k 30mm Diameter Gauges

 

Model DG2030-5k DG2030-10k DG3030-5k DG3030-10k Units
Number of axes 2 2 3 3 -
Scan rate 5000 10000 5000 10000 scan/s/axis
Cumulative scan rate 10000 20000 15000 30000 scan/s
Update time 200 80 200 80 µs
Maximum weight 5 6.5

Sản phẩm khác

CTY TNHH DỊCH VỤ KỸ THUẬT TỰ ĐỘNG HÓA LÂM TUỆ ĐỨC
CTY TNHH DỊCH VỤ KỸ THUẬT TỰ ĐỘNG HÓA LÂM TUỆ ĐỨC
CTY TNHH DỊCH VỤ KỸ THUẬT TỰ ĐỘNG HÓA LÂM TUỆ ĐỨC
CTY TNHH DỊCH VỤ KỸ THUẬT TỰ ĐỘNG HÓA LÂM TUỆ ĐỨC
CTY TNHH DỊCH VỤ KỸ THUẬT TỰ ĐỘNG HÓA LÂM TUỆ ĐỨC
CTY TNHH DỊCH VỤ KỸ THUẬT TỰ ĐỘNG HÓA LÂM TUỆ ĐỨC
CTY TNHH DỊCH VỤ KỸ THUẬT TỰ ĐỘNG HÓA LÂM TUỆ ĐỨC
CTY TNHH DỊCH VỤ KỸ THUẬT TỰ ĐỘNG HÓA LÂM TUỆ ĐỨC
CTY TNHH DỊCH VỤ KỸ THUẬT TỰ ĐỘNG HÓA LÂM TUỆ ĐỨC
CTY TNHH DỊCH VỤ KỸ THUẬT TỰ ĐỘNG HÓA LÂM TUỆ ĐỨC
CTY TNHH DỊCH VỤ KỸ THUẬT TỰ ĐỘNG HÓA LÂM TUỆ ĐỨC
CTY TNHH DỊCH VỤ KỸ THUẬT TỰ ĐỘNG HÓA LÂM TUỆ ĐỨC
Hotline tư vấn: 0979 349 375 (Sales ) | 0948 708 042 (Sales Admin)
Zalo