Bộ khuếch đại tín hiệu ngọn lửa FLAME AMPLIFIER 3001S BFI Automation Việt Nam

Technical data

Two safety times adjustable in 6 steps (1 – 6 seconds)
Two sensitivity ranges adjustable in 99 steps (01 – 99)
Hysteresis
Threshold flame “ON” adjustable in 64 steps (25 – 75 %)
Threshold flame “OFF” fixed at 25 %
Flame relay 2 potential free change-over contacts, floating
(1 fused safety circuit, 1 subsidiary circuit)
Max. switching voltage: 250 V (ohmic load)
Max. switching current: 1 A (ohmic load)
Max. switching power: 300 VA
Flame intensity display 0-100 % (built-in luminous bar indicator)
Current output 0(4) – 20 mA, (Ra < 360 Ohm)
jumper selection
Pre-alarm adjustable in 10 steps
Pre-alarm output 24 V, 100 mA, short circuit proof
Channel selection 24 V, 40 mA
Switch-on delay jumper selection (“ON”/”OFF”)
Locked channel selection
or monitor channel “OFF” message 15 V, 10 mA
Status indicator:
Channel I or channel II LED green = “On”
Pre alarm LED yellow = “On”
Evaluation and monitor channel LED yellow = “On”
Supply: 24 V DC
Current consumption approx. 300 mA
Operating temperature: -20 degrees to +70 degrees C (-4 to +158 °F)
Protection class: IP 00
Weight: 700 g
Plug-in type module for standard 19“-racks, in accordance with DIN 41494.
Width 50.46 mm (10 HP)
Height 128.7 mm (3 U)
Depth 188.0 mm

https://www.bfi-automation.de/en/categories/system-3000/flame-amplifier-3001s