Đồng hồ giám sát điện áp AC HC 6010-A/HSIANG CHENG

Đ/c: Số 21, Đường Số 12, Khu Đô Thị Vạn Phúc, P. Hiệp Bình Phước, Q.Thủ Đức, Tp HCM

CTY TNHH DỊCH VỤ KỸ THUẬT TỰ ĐỘNG HÓA LÂM TUỆ ĐỨC

E-mail: sale09@ltdautomation.com.vn

Mã sản phẩm: Đồng hồ giám sát điện áp AC HC 6010-A/HSIANG CHENG
Giá: Liên hệ
Lượt xem: 12430
Đồng hồ giám sát điện áp AC HC 6010-A/HSIANG CHENG

Thông tin sản phẩm
Bình luận

Characteristics:

Over 90 power and energy parameters for factory and building automation
Modbus^®RTU protocol
Maximum 600V
True RMS conversion
Instant maximum and minimum
VFD display clear and long-life
Build in RTC (real time clock)
Field programmable PT / CT ratio
Accuracy up to 0.15%
4 isolated analog outputs to transducer function
4 pulse outputs based on KWH, KVarH, KVAH or AH
Maximum demand control applicable
Memory for all setup and energy data
Comprehensive self test diagnostics
Low input burden 0.1VA (5A / 120V)
Wide power supply range for AC / DC
Compact physical configuration
Compatible for DIN & ANSI cut out
2KV RMS input / output / power isolation

Product Description:

The HC6000 is a cost efficient, multi-function Power Meter that replaces conventional analog or digital instruments and switches.The HC 6000 is specifically designed to be compatible with the world’s 2 most widely used DIN standard panel instruments (It fits the DIN 92 x 92 mm panel cutout holes) and is easily and efficiently hooked upr. It’s hardware is suitable for either 1 phase 2 wires, 1 phase 3 wires, 3 phase 3 wire or 3 phase 4 wires networks.HC6000 can communicate via serial port (RS-485 or RS-232), and Modbus® .It’s internal software provides a simple yet practical solution to energy management for factories, small and large Plants.Te VFD monitor displays V, A, VA, W, Var, WH, etc. It also displays maximum and minimum values, maximum demand control, time stamping and more than 90 power and energy parameters.

Features:

Factory & Building Automation (FA & BA)The HC 6000 is developed for factory and building automation (FA & BA) applications. It can meter the power and energy parameters of a wide range of industrial power distribution systems and AC switch-gears.

PLC Modbus CompatibleThe Modbus® communications protocol allows information and data to be efficiently transferred between HC 6000 and modicon programmable logic controllers (PLC) or other third party Modbus® compatible monitoring and control systems. The HC 6000 can also establish a monitoring system just simply adopt an IPC-based centralized master display software.(RTU mode Modbus® protocol with default baud rate 9600 bps, none parity, 8 data bit.)

Built-in Real Time Clock (RTC) HC 6000 appends a time stamp for all maximum and minimum energy measurements records. Ideal for identifying abnormal events and easy record accessibility. It also provides a demand-control time period 15 / 30 minutes for maximum power demand control of utility load shedding.

MemoryAll of the meter status setting and energy data are retained in in a non-volatile memory . HC 6000 records includes the watt-hour measured, maximum demand values, date and time, PT and CT ratio and system configuration

Field ProgrammabilityEasily set CT and PT ratios, Modbus® address, communication baud rate, parity, meter’s display, etc. programmed by front panel or by PC via RS-485 / RS-232.

Accuracy up to 0.15%Hsiang Cheng’s conversion, sampling and software compensation technology provide the HC6000 with the high accuracy required for today’s needs. Voltage and current accuracy up to 0.15% and power to 0.25%.

Comprehensive CommunicationModbus® ( compatible with the modicon system ).RS-485 / RS-232
Modbus® communication between modicon programmable logic controllers (PLC), RTU Power SCADA system and DCS systems

Specifications :

Range:
Voltage :	10 – 600V
Current :	suitable for CT secondary rating (optional)Maximum 6A for 5A ratingMaximum 1.2A for 1A rating
Frequency :	40 – 70Hz
Burden:
Voltage:	< 0.4VA at 600V< 0.04VA at 150V
Current:	< 0.1VA at 5A
Overload rating	Current	Voltage
	2 x rated continuous10 x rated 30 seconds25 x rated 2 seconds50 x rated 1 seconds	750V continuous1000V 10 seconds1200V 3 secondss
Input/Ouputs/ Special Features
Measured systems	3 phase 4 wires3 phase 3 wiressingle phase 2 & 3 wires3 phase balanceSelect by input wiring & software configuration
Pulse output (PO)	4 pulse outputs photo-isolated (max.)
Configurable Parameter:	WH / VarH / VAH / AHUnit, +1WH / +1QH / 1VAH / 0.01AH
Pulse width	50% duty cycle
Analog output (AO)	0.5% fs accuracy
Outputs	4 isolated analog outputs (maximum)
Standard output:	4-20mAdc / load < 500Ω
Configurable Measured parameters	Input range, unipolar / bipolar
Event logger	200 events with time-stampedStatus change of switch inputActivation of setpoints / alarmsOperation of controlled relay output Failure in self-test Programming access Trace memory triggered Power ON / OFF
Maximum / minimum logger	20 parameters with time-stamped P1, P2, P3, PE, L1, L2, L3, LE, A1, A2, A3, A0, AE, W, Var, VA, F, PF, Vubl, Aubl
General Specifications
Communication ports:	RS485 ( standard ) ;RS232 ( option )Modbus® RTU protocol
Display:	VFD / 0.28″ / green color, 3 rows of 9 alphanumerics
RTC	Maximum deviation 5 sec in 24 hoursTime for year / month / date / hour / minute / sec
Dielectric strength:	IEC 255-5, 2KV AC rms 1 minute between input / output / power
Impulse and surge test:	ANSI/IEEE C37.90.1-1989 (3KV) SWC testIEC 255-22-1 class III SWC testIEC 255-22-4 class IV (IEC 801-4) SWC testIEC 255-5 1.2 x 50us (5KV) impulse test
Stability:	Temperature range -25 to +55°C,Maximum 100 ppm / °CLong term stability 0.15% drift maximum per year
Operating condition:	Temperature range -25 to +60°C,RH 20 – 95% non-condensed
Storage condition:	Temperature range -25 to +70°C,RH 20 – 95% non-condensed
Power supply:	AC 80 – 260V, 40 – 70 Hz, DC 80 – 330VDC 20 – 60V (option)Dissipation maximum 12VA for AC / 6 watts for DC
Mounting / Dimension:	Panel type mountingSize : 120 x 120 x 130.5mmCut out : 92 x 92mm

Sản phẩm khác

Model: F-203AV-1M0-MGD-55-V Digital Thermal Mass Flow Controller for Gases BRONKHORST VIET NAM

Giá: Liên hệ

Model : Multipoint II (GRP enclosure) Newson Gale Vietnam

Giá: Liên hệ

dbk+4/M12/3BEE/M18 E+S, cảm biến siêu âm, ultrasonic double-sheet control, Microsonic Vietnam

Giá: Liên hệ

Bộ phân tích khí cầm tay DM70 - F5A4B3B1 VAISALA

Giá: Liên hệ

Bộ lấy mẩu khí VAISALA DSS70A Portable Sampling System DSS70A and Sampling Cells Vaisala

Giá: Liên hệ

Bộ nạp nito cho bình tích áp Model FPU-1-400F2.5G2A3K Hydac Việt Nam

Giá: Liên hệ

Model : F381A (Standard unit) Unipulse Vietnam

Giá: Liên hệ

Công tắc lưu lượng; Kobold; Model: VKM-3207-U0-R20-B-R Kobold Việt Nam

Giá: Liên hệ

Công tắc áp suất; CCS; 675GEM8002; Dải đo: 7-12,9 In. H2O (17.4-32.1 mbar) CUSTOM CONTROL SENSORS

Giá: Liên hệ

Công tắc áp suất CCS; 675GE1; Dải đo: 1,5-30 In.H2O (3.7-75 mbar) Custom Control Sensors Việt Nam

Giá: Liên hệ

Điện cực pH CPS111BA2GSA NSX: Endress+Hausser

Giá: Liên hệ

Điện cực Clo dư - thang đo: 5 mg/l Mã số CCS51AA11AD03+NC SX: Endress+Hausser

Giá: Liên hệ

THÔNG TIN LIÊN HỆ

CTY TNHH DỊCH VỤ KỸ THUẬT TỰ ĐỘNG HÓA LÂM TUỆ ĐỨC

Địa Chỉ Đăng ký : 688/44/2 Lê Đức Thọ, Phường 15, Quận Gò Vấp, Thành phố Hồ Chí Minh, Việt Nam.

MST: 0318175058

Địa Điểm Kinh Doanh : Số nhà 21, đường số 12, khu nhà ở Vạn Phúc 1, Tổ 10, Khu phố 5, Phường Hiệp Bình Phước, Thành phố Thủ Đức, Thành phố Hồ Chí Minh, Việt Nam.

Điên Thoại : 0979 349 375 /0916 597 556

Email: Sale09@ltdautomation.com.vn

Website: tudonghoasg.com.vn

Online: 108 | Tổng truy cập: 12476415

Chính sách công ty