Erhardt-Leimer Vietnam, DO 8221, AG 2591, AG 2491, DC 0340, SR 4129

100% Germany Origin

Erhardt-Leimer Vietnam

Spare parts for OC 264774 - KDN 707724
Part No: 00833989
DO 8221 CoDeSys 2.3
Application/camera computer for standard application, for one or two OL 82 cameras. according to dimension sheet M 158501
Operating voltage 24 V DC
-including basic software DO 8...
- without application software (CAT)
Note:
- no application software required
- parameterseting acording to KDN 707724 (OC 264774)
IP-adress: 10.6.33.61
GRP: 0 DEV: 9

100% Poland Origin

Erhardt-Leimer Vietnam

Spare parts for OC 264774 - KDN 707724
Part No: 00474781
camera cable shielded for OL82xx, A-coded, with 8-pol. plugs M12 male right angle and M12 female straight, UL-Style length: 10m
Note: existing camera cable could be reused, but it is better to replace, because of cut out at shield of cable for grounding

100% Germany Origin

Erhardt-Leimer Vietnam

Spare parts for OC 264774 - KDN 707724
Part No: 00210896
AG 2591 actuator, as per drawing M 057627 50 watt, stroke +/- 25 mm, thrust 1000 N, follow-up speed 24 mm/s, with DC geared motor I = 8:1 and encoder

100% Germany Origin

Erhardt-Leimer Vietnam

Spare parts for OC 264774 - KDN 707724
Part No: 00204474
AG 2491 actuator, as per drawing M 057453, 20 watt, stroke +/- 25 mm, thrust 240 N, follow-up speed 25 mm/s, with DC geared motor I = 8:1 and encoder

100% Germany Origin

Erhardt-Leimer Vietnam

Spare parts for OC 264774 - KDN 707724
Part No: 00327452
DC 0340 digital position controller with enclosure, as per dimensional drawing 157872, software with CAN data format 2.0, output voltage 22 V, output current 5A, for digital sensors, operating voltage 24 V DC
Note: we prefer to replace complete SRS4101 system instead of
steering roller frame without roller, controller, ... look at Pos. 500 - 600 SRS4101 system complte

100% Germany Origin

Erhardt-Leimer Vietnam

Spare parts for OC 264774 - KDN 707724
Part No: 00329179
SR 4129 steering roller assembly as per drawing KBS7770, open frame design
with roller boxes, return-to-center switch, for DC actuator 20 W with incremental encoder, stroke +/- 50 mm, with 20x20 mm sensor bar for sensor design, one roller D = 120 mm NB = 1200 mm, M = 1350 mm