Model : IC694BEM331 Genius Bus Controller Used RX3I PLC GE FANUC VIETNAM

The Genius Bus Controller, IC694BEM331, interfaces a PACSystems RX3i and a Genius I/O serial bus. In addition to the Bus Controller, the bus can serve: Genius blocks, other PLCs with Genius Bus Controllers, Remote Drops, VersaMax and Field Control I/O Stations, Genius Hand-Held Monitor (HHM), Multiple hosts.

Features

•      The Bus Controller can exchange up to 128 bytes with each device on the Genius I/O bus.
•      Genius blocks and other devices on the bus automatically report faults, alarms and certain other predefined conditions to the Bus Controller. The Bus Controller stores any diagnostic messages it receives. They are read automatically by the CPU. Faults can then be displayed in the fault table using the programming software.
•      The Bus Controller supports all Genius datagrams. Refer to chapter 3 of the Genius I/O System and Communications User’s Manual, GEK-90486-1, for details on using datagrams.
•      The Bus Controller can send up to 128 bytes of Global Data each bus scan. Global Data is data that is automatically and repeatedly broadcast by a Genius Bus Controller.
•      The Bus Controller can receive up to 128 bytes of Global Data each bus scan from every other Bus Controller on its bus. Up to eight Genius Bus Controllers can be included in an RX3i system.

RELATED PRODUCTS