Model: IRIS 3001 Art No: 6020-3001-00 Flame Amplifier BFI Vietnam

Technical data

The flame amplifier is self-monitoring for the fail-safe function control accordance to EN298:2012.
Two safety times set in 1 - 6 steps (1 –6 seconds), longer times on request
Two sensitivity ranges set by digital switches, ratio 1:99
Hysteresis:
Switching point flame „ON“ adjustable in 64 steps, 5 - 15 mA
Switching point flame „OFF“ < 5 mA
Flame relay: 2 changeover contacts, floating
(1 safety circuit, 1 subsidiary circuit)
Flame intensity display: 0-100 % (Built-in luminous bar indicator)
Current output 0-20 or 4-20 mA: selection-jumper shunt resistance max. 300 W
Pre-alarm: set by 10 steps / 2 mA
Pre-alarm output: 24 V, 100 mA, short circuit proof
Channel selection: 24 V, 40 mA
Quantization switchover: plug-in bridges
Locked range switchover
or monitoring channel „off“ message 15 V/10 mA
Status indication on LEDs: channel I or channel II 'on' = green
evaluation channel (RF) and monitoring channel (RM) 'on' = yellow
Pre-alarm signal (MA) 'on' = yellow
Supply: 24V DC, 500 mA
Current consumption: approximate 150 mA
Ambient temperature: -20°C to +70°C
Protection: IP 00
Weight: 700 g
The following applies to the safety circuit:
max. switching voltage: 250 V ohmic load
max. switching current: 1 A, ohmic load
max. switching power: 300 VA
All modules of the series 3000 are plug-in types for using in 19“-magazines accordance to
DIN 41494 (19“-norm).
The dimensions of all modules are:
Width 70.78 mm = 14 HP
Height 128.70 mm = 3 U
Depth 188.00 mm

https://www.bfi-automation.de/en/categories/system-3000/flame-amplifier-3001#