Oil Monitor - WIOM350 Model: WIOM350-L100-0-0-1-0 Hollinsys Vietnam

Water in Oil Monitor - WIOM350

WIOM350 water in oil monitor is specially designed for both bypass and direct insertion applications and gives precise measurements of water content in oil and other hydrocarbons or any non-conducting liquid.

The bypass method can be installed on systems with smaller pipe diameters, offering ease of calibration and cleaning, while the direct insertion method provides a simpler arrangement for measurement in sumps and storage tanks.

Both provide on-line analysis of crude, fuel, hydraulic and lubricating oils for traces of water with the same accuracy for alerting operators to the danger of water breakthrough, or as a quality control check. Robust engineering combined with a simple 4...20 mA output makes this a reliable and easy to use instrument for water detection. 

- New technology

- High accuracy

- 4-LED display, alarm indication

- Analog linear output

- 2 setpoints for alarm and protection

- Field calibration available

- 11-point table indexing function

- Panel button operation

- Customed probe length available

Technical Data

Housing

140 (L) x 80 (W) x 62 (H), IP 65

Power supply

24 VDC +/- 10%

Setpoints

2 setpoints, by panel buttons, SPDT, 30 VDC 2A / 125 VAC 0.6 A

Range

0..10%, re-configurable

Analog output

4..20 mA, 500 Ohm max.

Resolution

Better than 0.03 %

Probe

100 mm, brass, G1/2” thread

Working Temp.

0..70 ⁰C, Compensation range 0..70 ⁰C

Fluid pressure

1.6 MPa max.

Elec. connection

Detachable terminal, Pg 11

Options

Available on request

230 VAC power supply

Specified probe length