Part No :01-92-34522-A I Part No: 00-92-35200-A Analys 2016net I 01-91-34496-A I 01-91-34523-A I 00

No

Code & Description

Q’ty

1

P/No: 01-92-34522-A

Programming Analys 2016net with 13 MP

1

2

Replaced by :

Part No: 00-92-35200-A

Analys 2016net

Analyser with up to 16 measuring points for the measurement of toxic or explosive gas or oxygen with a pump-bypass system.Indication of the gas concentration and the alarm status. To actuate the pre sucktion pump block. To actuate the solenoid valve block with separately pre suck and sample drawing. The system can be adapted to all customized requirements, simply with the password protected menu structure. The configuration of the alarm organization is very simply realized with the integrated alarm matrix.

Technical Data:

Type of device: Analys 2016net

Power Supply: 24V DC

Max. Consumption: 25W

Temperature Range: -20°C to +50°C (short time 60°C)

Analog-Output: 1x4-20mA (max. 250 ohms)

Digital-Output: 4 Logic Signal for Alarm 1 to 4

1 Logic Signal for Sensor Fault

1 Logic Signal for Calibration Mode *

1 Logic Signal for Calibration Status

1 Logic Signal for Maintenance Alarm

to activate the Solenoid Valve Unit

to activate the Presuction Pump Block

Network: TCP/IP RS232C, CAN Bus

(in preparation)

Remote Control: with TCP/IP

Data Pick Out: with FTP

Event Recorder: for max. 4000 Events

Temperature Recorder: for max. 4000 Events

* Note dew point of sampling

Technical Data IR-Sensor:

Type of Gas: Methane CH4

Measuring Principle: ND-Infrared Detector

Measuring Range: 0-100% LEL

Reaction Time T90: < 10 seconds

Accuracy: 2% FS

Stability: < ± 1% / Month

Zero-Drift: < ± 1% / Month

Temperature Range: -20°C to +50°C (short time 60°C)

Relative Humidity: < 99% RH

Warm up Time: 1 hour

Electrical Connections:

Power Supply: 3 pole Plug

Interface: 2x37 pole Plug

RS232C: 1x9 pole Plug

CAN: 1x9 pole Plug

TCP/IP: 1x RJ45

Remote Control: with Web Interface

Housing Type: 19'' inch rack version

Painting: RAL 7035/5002

Type of Protection: IP30

Note: Analys 2000 that is replaced and 100% compatible with the new Analys 2016net.

(Tanguard 2000)

2

3

P/No: 01-91-34496-A

Programming TanGuard 2016net 1 for GT13E

(KKS218 replacement for Tanguard 2008)

Sensor 1 Exhaust Air Duct Sensor 1 KKS CYQ01CQ212

Sensor 2 Ignitiongas Sensor KKS CYQ01CQ281

1

4

P/No: 01-91-34523-A

Programming Tanguard 2016net 2 GT13E2

(KKS219 replacement for Tanguard 2008)

Sensor 1 Exhaust Air Duct Sensor 2 KKS CYQ01CQ213

1

5

P/No: 00-91-35100-A

TanGuard 2016net

TanGuard 2016net is the modern microprocessor based gas warning device to monitoring and alerting of toxic and explosive gases and steams for up toeight measuring points into compact 19'' inch rack.The system can be udapted to all customized requirements simply with the password protected menu structure. The attitudes for the attached gas transmitters are made with the internal keyboard.The configuration of the alarm organization is

verysimply realized with the integrated alarm matrix.

Technical Data:

Type of  Device: TanGuard 2016net

Power Supply: 24V DC

Max. Consumption: depending on Sensor Type max. 50W

Temperature Range: -0°C to +50°C (short time 60°C)

Analog-Output: 8x4-20mA (max. 250 ohms)

Digital-Output: 8x3 Logic Signal for Alarm 1 to 4

1 Logic Signal for Sensor Fault

1 Logic Signal for Calibration Mode*

1 Logic Signal for Calibration Status

1 Logic Signal for Maintenance Alarm

Network: TCP/IP RS232C, CAN Bus

(in preparation)

Remote Control: with TCP/IP

Data Pick Out: with FTP

Event Recorder: for max. 4000 Events

Temperature Recorder: for max 4000 Events

Electrical Connections:

Power Supply: 3 pole Plug

Interface: 2x37 pole Plug

RS232C: 1x9 pole Plug

CAN: 1x9 pole Plug

TCP/IP: 1x RJ45

Remote Control: with Web Interface

Housing Type: 19'' inch rack version

Painting: RAL 7035/5002

Type of Protection: IP30

2

6

00-00-30988-A

Certificate of conformity signed and stamped

1

7

00-00-34535-A

Manual TAN-1104 (CD)

1

8

00-00-32095-A

Packaging, transport and insurance DAP

1