Part number: 385Z-05322 F12A GREEN LINE Zero-Speed Hall Effect Sensor JAQUET Vietnam
- Mã sản phẩm: Part number: 385Z-05322 F12A GREEN LINE Zero-Speed Hall Effect Sensor JAQUET Vietnam
- Giá: Liên hệ
- Lượt xem: 6147
- Part number: 385Z-05322 F12A GREEN LINE Zero-Speed Hall Effect Sensor JAQUET Vietnam
Housing: M 12 x 1 Connector: M12x1 standard / 4 pins
Supply voltage: 8...25 VDC
Signal output: Square wave signal from NPN output transistor with 2.7 kOhm pull-up, DC-coupled
to the supply (negative pole = reference voltage) Max. load 25 mA. Output voltage
HI : power supply voltage. Output voltage LO: < 0.5 Volt at I = 25 mA.
Operating temperature: -20....+ 100 ˚C
Frequency range: 0 Hz...15kHz
Connector: Euro M12 thread 4 pin connetor
Air gap: For pole wheels M1 (DP 25.4): 0.3 ... 0.5 mm and M2 (DP 12.7): 0.3 ... 1.5 mm
Installation: The sensor wires must be laid as far as possible from electrical motors, relays,
solenoids, etc., and must not be run parallel with power cables. The maximum recommended cable length is 20
meters (65 feet). Using radial or axial mounting, the sensor should be mounted with the center of the sensor face
over the center of the gear teeth or targets. Using radial sensor mounting, some axial movement is permissible when
using a sufficiently thick target. A solid and vibration free mounting of the sensor is important.
Connecting diagram:
-
- Thông tin sản phẩm
- Bình luận
Sản phẩm khác
E-mail: sale09@ltdautomation.com.vn
