- Mã sản phẩm: Code: OXY3690MP-0-GGO-A1-L01
- Giá: Liên hệ
- Lượt xem: 5390
- measuring ranges: 0.0 to 100.0% O2 (gaseous); -20.0 to +50.0°C output signal: 4-20mA auxiliary energy: 12 -30VDC connection: 5-pin jack connector, screwable
-
- Thông tin sản phẩm
- Bình luận
OXY3690MP-0-GGO-A1-L01, O2 Transducer for Air Oxygen Measurements, incl. Sensor
Transducer equipped with the GGO sensor for measurements at atmospere and in systems without over or under pressure.
Additionally the GGO can be screwed impermeable to systems with low over or under pressure.
Technical data:
Measuring range oxygen concentration: 0,0 ... 100.0 % O2 (gaseous)
Measuring range temperature: -20.0...+50.0 °C
Device accuracy (at nominal temperature 25°C):
Oxygen: ±0.1% ±1 digit
Temperature: ±0.1°C ±1 digit
Output signal (only O2): 4-20mA (2-wire - standard)
0-10V (3-wire - option)
Electric isolation: input electrically isolated
Auxiliary energy: 12 ... 30 V DC (at output 4-20mA)
18 ... 30 V DC (at output 0-10V - option)
Perm. impedance (at 4-20mA): RA [Ohm] = (Uv [V] - 12V) / 0.02A
Permissible load (at 0-10V): RL > 3000 Ohm
Working condition: 0 to +50°C, 0 to +95%RH (non-condensing)
Storage temperature: -20 to +70°C
Reverse voltage protection: 50V permanently
Display: approx. 10 mm high, 4-digit LCD-display
Housing: ABS (IP65 - with the exception of sensor plug)
Dimensions: 82 x 80 x 55mm (without elbow-type plug and sensor plug)
Electric connection: elbow-type plug acc. to EN 175301-803/A (IP65),
max. wire cross section: 1.5mm², wire diameter from 4.5 to 7mm
Sensor connection: 5-pin jack connector, screwable
Calibration: 1-point calibration in atmospheric air.
Air pressure compensation: 500...2000hPa abs., manually input
Oxygen probe, standard:
Probe design: GGO 370 (closed design)
Sensor name: GOEL 370
Sensor type: electrochemical partial oxygen pressure sensor
Measuring range: 0.0 to 100.0% O2
Response time T90: <10 sec., depending on temperature
Warranty: 12 months (assuming appropriate usage according to the manual)
Application area: suitable for air and pure oxygen, suitable for high CO2-concentrations
Temperature compensation: integrated in oxygen sensor
Connection cable: approx. 1.3 m, with 5-pin plug, screwable
Operating pressure: 500 ... 2000hPa (static).
For air and gas-stream use the oxygen sensor GOO.../MU.
Working condition: -5 to +50°C, 0 to +95%RH (non-condensing)
Storage temperature: -15 to +60°C
Dimensions of housing: approx. Ø 40 x 103mm (153mm incl. anti-buckling glanding)
housing with M16x1-screw thread (sensor can be connected to line tubes by means of an included adapter piece)
Weight: approx. 135g
Option upon surcharge:
AV010: output voltage 0-10V
GOO: oxygen sensor GOO 370 / MU, open sensor type, suitable for air and gas-stream.
KL10: sensor connection cable 10m
https://www.ghm-group.de/fileadmin/Infothek/Gesamtproduktinformationen/EN/ghm_pi-gr-co-co2-o2_e.pdf
Sản phẩm khác
Part no. 4448242201 Pyrometers PYROSPOT DT 44L I 3310A11112 Connection cable I 3310A14020 Interface
Giá: Liên hệ
GE Panametrics MISP2 Probe MISP2‐2R‐T-0‐0-0-0‐0 Aluminum oxide moisture sensor probe types
Giá: Liên hệ
NS287-59E, LEVEL SWITCH, SERIAL: 16H4012, Nakakita Seisakusho Vietnam, Công tắc báo mức NS287-59E
Giá: Liên hệ
Model: RHT Climate WM-485-LCD P/N: 8804000101 TEMPERATURE AND HUMIDITY TRANSMITTERS NOVUS Vietnam
Giá: Liên hệ