- Mã sản phẩm: SLRM6060
- Giá: Liên hệ
- Lượt xem: 2726
- Từ năm 1999, Proton là một trong những thương hiệu tiên phong về giải pháp đo lường cho ngành sản xuất sợi và cáp. Proton thấu hiểu nhu cầu thực sự của nhà sản xuất sợi và cáp, từ đó đưa ra các sản phẩm tiên tiến nhằm cung cấp các giải pháp đo lường chính xác và dễ dàng sử dụng. Qua đó, sản phẩm của Proton đã xuất hiện trong dây chuyền sản xuất của các nhà sản xuất sợi và cáp hàng đầu thế giới. Vui lòng liên hệ Hotline 0914 237 179 để được tư vấn thêm.
-
- Thông tin sản phẩm
- Bình luận
Features
- Non-contact, high-speed, solid-state laser speed and length measurement with no slippage, drift or mechanical wear and greatly reduced maintenance compared with contact wheel / roller systems.
- Bidirectional speed and length measurement; accurately measures speed and length during line stoppage, reversal and creepage.
- UKAS-traceable calibration; accuracy better than 0.05% and repeatability better than 0.02%.
- Rugged industrial design for use in harsh factory environments.
- Available fitted with industry-standard communcations interfaces for easy integration with PLCs and production line equipment.
- Excellent value with low cost of ownership.
- Harsh environment enclosures are available from Proton Products on request.
Introduction
InteliSENS®Proton Products InteliSENS® SLRM Series non-contact, bidirectional speed and length gauges provide extremely accurate speed and length measurements for metals industry applications. They are available with extended stand-off distances and greater depth-of-fields than the standard InteliSENS® SL Series gauges, which allows them to be used to measure very high temperature objects such as in hot-rolling processes.
Automatic direction detection and measurement down to zero speed means that the InteliSENS® SLRM gauge length measurement counts both up and down, so final length measurements will still be accurate to 0.05% even with production lines that exhibit stoppage, direction reversal and creepage.
Applications requiring a precise cut-to-length process benefit from the non-slip and highly accurate laser measurement technique which reduces scrap, increases uptime and improves material yield by eliminating product “Give Away” or “Short Length” claims.
InteliSENS® SLRM Series gauges are money-saving, direct replacements for traditional problematic and high-maintenance contact wheel and roller-type devices and are extremely easy to install and operate. Integration with production line controllers such as PLCs is eased by the availability of a wide variety of industry standard communications interfaces.
Operating principle – Heterodyne laser surface velocimeter
Proton Products InteliSENS® Series speed and length gauges illuminate the measured surface with a precisely pitched interference pattern created by the intersection of two laser beams. The alternating bright and dark interference fringes modulate the light scattered by the object with a frequency proportional to the object speed. This scattered light is detected by a photodiode and the electrical signal digitally processed to determine the frequency and hence the speed. Object length is then calculated by integrating the speed measurement over time.
The InteliSENS® SLRM series bidirectional speed and length gauges extend this principle by using a high-frequency Bragg cell modulator to illuminate the measured surface with a scanning interference pattern, which generates an oscillating light signal even when the object is stationary. Direction of motion is determined by whether the scattered light frequency is higher or lower than the stationary frequency.
Specifications
Model SLRM | 6060 | 120120 | 150200 | 200100 | 200200 | 250200 | Units |
---|---|---|---|---|---|---|---|
Stand-off distance* | 600 | 1200 | 1500 | 2000 | 2000 | 2500 | mm |
23.6 | 47.2 | 59.1 | 78.7 | 78.7 | 98.4 | inch | |
Depth-of-field | 60 | 120 | 200 | 150 | 200 | 200 | mm |
2.36 | 4.72 | 7.87 | 5.91 | 7.87 | 7.87 | inch | |
Maximum speed (bidirectional) | 5000 | 10000 | 10000 | 5000 | 10000 | 10000 | m/min |
16400 | 32800 | 32800 | 16400 | 32800 | 32800 | ft/min | |
Weight | 3 | 4.5 | 4.5 | 4.5 | kg | ||
6.6 | 9.9 | 9.9 | 9.9 | lb | |||
Length | 230 | 297 | 198.5 | 302 | mm | ||
9.06 | 11.69 | 7.81 | 11.89 | inch | |||
Width | 130 | 140 | 288 | 130 | mm | ||
5.12 | 5.51 | 11.34 | 5.12 | inch | |||
Height | 75 | 93 | 97 | 75 | mm | ||
2.95 | 3.66 | 3.82 | 2.95 | inch |