- Mã sản phẩm: BG1030
- Giá: Liên hệ
- Lượt xem: 3079
- Từ năm 1999, Proton là một trong những thương hiệu tiên phong về giải pháp đo lường cho ngành sản xuất sợi và cáp. Proton thấu hiểu nhu cầu thực sự của nhà sản xuất sợi và cáp, từ đó đưa ra các sản phẩm tiên tiến nhằm cung cấp các giải pháp đo lường chính xác và dễ dàng sử dụng. Qua đó, sản phẩm của Proton đã xuất hiện trong dây chuyền sản xuất của các nhà sản xuất sợi và cáp hàng đầu thế giới. Vui lòng liên hệ Hotline 0914 237 179 để được tư vấn thêm.
-
- Thông tin sản phẩm
- Bình luận
Features
- Non-contact, laser measurement does not deform or mark measured objects.
- Available in 27 or 57mm maximum measurement models.
- Provides statistical analysis of measurements.
- Available fitted with optional rotary chuck or V-groove sample holders.
- Extremely easy to use.
- For off-line, stand-alone use in incoming inspection, quality control and laboratory applications.
Introduction
Derived from the highly successful InteliSENS® DG Series of scanning-laser diameter gauges, the InteliSENS® BG Series bench gauges are intended for off-line, stand-alone use in incoming inspection, quality control and laboratory applications.
A Proton Products InteliSENS® DG Series scanning-laser diameter gauge is integrated together with a miniature touch screen PC and a mains power supply unit on an aluminium baseboard. Depending on the application, optional ground steel V-grooves or a rotary chuck may also be integrated for precise sample holding.
InteliSENS® BG Series bench gauges are a fast, easy-to-use and non-contact alternative to vernier callipers and micrometer screw gauges. The touch screen PC provides measurement display with automatic maximum/minimum and ovality calculation, statistical analysis and data logging. Logged data may be extracted from the touch screen PC using a USB flash memory stick.
Operating Principle
Proton Products InteliSENS® DG Series diameter gauges rapidly scan a laser beam across the object under measurement. The laser beam is focused by a receiving lens onto a photodiode and the electrical signal digitally processed by a Proton-designed FPGA processor. The time duration for which the object obscures the laser beam is directly proportional to the object diameter.
Specifications
Model | BG1030 | BG1060 | Units |
---|---|---|---|
Gate size | 30 | 60 | mm |
1.18 | 2.36 | inch | |
Minimum diameter | 0.1 | 0.2 | mm |
0.004 | 0.004 | inch | |
Maximum diameter | 27 | 57 | mm |
1.063 | 2.244 | inch | |
Resolution | 1 | 1 | µm |
Accuracy | ±(1µm + 0.008% of object diameter) | ±(1.5µm + 0.008% of object diameter) | - |
Specification | Minimum | Typical | Maximum | Units |
---|---|---|---|---|
Measurement rate | 600 | scan/s | ||
Operating temperature | 5 | 45 | °C | |
41 | 113 | °F | ||
Relative humidity (at 38°C / 105°F) | 90 | % | ||
Power supply voltage | 85 | 220 | 264 | VAC (rms) |
Power supply frequency | 47 | 65 | Hz | |
Power consumption | 24 | W |